TLSense J3060: 2x Gigabit LAN, Intel Celeron J3060, 16GB SSD, 4GB RAM

TLSense J3060 is a dual-port, small form factor appliance; its performance is between APU and the full-size TLSense routers. 

Routing performance is significantly better than APU. It routes full gigabit on pfSense 2.5.2 and OPNsense without any configuration tweaks.

OpenVPN performance is similar to APU - about 100Mbit/s. If you are planning to build a high-performance VPN gateway, consider the full-size routers. 

It's a versatile appliance that can be configured as a firewall, router, VPN client, DHCP Server, DNS server, etc. In addition, it has an HDMI port, which makes it possible to use as a media server or similar.

Included in the box

• 1 x router (as specified above)
• 1 x Power adapter (12V, 4A) - EU cable.
• 1 x VESA mount (can be used to mount the router to a wall)

Tips:

• There's a SATA port on the motherboard, but there's no space in the enclosure for an additional 2.5 inch SATA drive. If you need more space, consider full-size TLSense routers.
• Use the HDMI port to enter into BIOS. (press F11 at boot)

Comparison to other models offered in the store

• This is a 2-port model with a dual-core J3060 CPU. Note, the 4 port model has a quad-core J3160 CPU. 
• Smaller than APU, and much smaller than the full-size TLSense routers: 115 x 107.5 x 39 mm
• Better routing performance than APU - full gigabit in pfSense/OPNsense without configuration tweaks.
• Much slower OpenVPN performance than full-size TLSense routers (only relevant if you plan to run OpenVPN client on it)
• This model does not work with WiFi cards offered in the store. (no PCI interface).
• Very low power consumption - similar to APU. 
• Memory can be extended to 8GB (APU supports up to 4GB)